JASCO Asia Portal - micro21 LC-01/02 Capillary Liquid Chromatograph -

micro21 Series

Products

Do you want to more information?
Please contact us.

micro21 LC-01/02 Capillary Liquid Chromatograph

All-in-one system design minimizing dead volume

micro21LC-01
Manual injection model

micro21LC-02
Autoinjection model

The micro21LC-01/02 Capillary Liquid Chromatograph is an all-in-one system combining two pumps for gradients, 4-line degasser, 2-line mixer with stirrer bar, and temperature controlled column oven. The compact design minimizes dead volume for reduction of band broadening due to the dispersion of analyte in the dead volume of the components and fittings. Built-in controller controls all components from pumps to column oven. Two models, micro21LC-01 for manual injection and micro21LC-02 for auto injection are available.

Seamless coupling with MS

Precise flow control at μL/min-order flow rate range makes possible the introduction of the entire amount of eluate from the column into mass spectrometry detectors without splitting.

Gradient starting from 1 μL/min

Pulse-free high precision flow control enables a high-pressure mixing gradient from 1 μL/min by using two built-in pumps. The mixer section is a dynamic mixing system, and its chamber capacity is 20 μL. The degasser, using the new material Teflon AF, achieves high degassing efficiency even at a low degassing volume of 145μL, thereby shortening the time required for solvent exchange.

Specifications

6855-J031A micro21LC-01 Capillary Liquid Chromatograph (manual injection)
6855-J041A micro21LC-02 Capillary Liquid Chromatograph (auto injection)
Pump unit
Flow rate setting :		0.1 ~ 300 μL/min with 0.1 μL increments
Recommended flow rate range :		Isocratic 0.2 ~ 200 μL/min
		Gradient 1.0 ~ 200 μL/min
Flow rate accuracy :		±4% of setting or ±0.08 μL/min whichever is greater at 1.0 ~ 200 μL/min, 1 ~ 25 MPa
Flow rate precision :		Less than 0.8 % (Relative Standard Deviation) at 1.0 ~ 200 μL/min
Max. pressure :		35 MPa (less than 100 μL/min)
		25 MPa (More than 100 μL/min)
Pressure limit :		0 ~ 35 MPa, Settable max. and min. pressure limit in 0.1 MPa increments
Gradient composition range :		0 ~ 100 % with 0.1 % increments
Gradient precision :		±3.0 %

Degasser part
Number of lines:		4
Solvent hold-up volume:		Approx. 145 μL each line
Maximum flowrate:		200 μL/min
Maximum Pressure:		0.2 MPa
Mixing part
Mixing method :		By rotation of stirrer bar
Number of inlet ports :		2
Mixing chamber capacity :		20 μL standard, 47, 80 μL optional

Column Oven part
Temperature control range:		15°C below ambient temperature to 65°C
Temperature setting range:		4°C ~ 65°C (set in increments of 0.1°C)
Column compartment:		320(W) x 20(H) x 18(D) mm

Others
Dimension:		450 (W) x 300 (H) x 500 (D) mm
Weight:		Approx. 38 kg
Power Input voltage:		AC100 ~ 240 V ±10% 50/60 Hz
Power consumption:		150 VA